Intellinet Network IP Camera Guide de l'utilisateur télécharger pdf (Page 61)

NETWORK IP CAMERA User’s Guide

E. Updating Network IP Camera’s newly upgraded Program

Download a newly updated firmware and upgrade S/W

You can download the newly upgraded Firmware and software through the Internet at the web site

(

http://www.intellinet-netwok.com/)

Identify the version of Firmware

You can identify the version of Network IP Camera’s Firmware on System Configuration Page. (But,

the version of firmware is required 0030078 or higher)

(You may check the version of your Network IP Camera firmware first and then try to update)

To check the present version of Firmware, follow the below step.

① Connect to your Network IP Camera’s homepage.

② Click “Administrator Tools”.

③ Move to System Configuration Page and then you can check the version of Firmware.

Upgrading the newly Network IP Camera’s firmware

This updated firmware can be upgraded in Local Area Network as well as remote site.

Follow the below step for upgrading your camera.

① Confirm that Network IP Camera can be connected to your PC.

( As long as you can access Network IP Camera’s Homepage, you can process upgrading)

② Execute the updated software on you PC.

Caution

This process is to update the current firmware that is already installed into your Network IP Camera

with a newly updated Firmware.

If you are to begin the process, follow the instruction as manual. And during the process, do no

give physical shock nor disconnect network and power. Otherwise, your Network IP Camera can be

damaged seriously, which may result inappropriate operation or operation failure.

If you failed to update Firmware or Network IP Camera does not operate properly after updating

rocess, please contact your dealer nearby in your area.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 70 71

Pas de commentaire

Intellinet Network IP Camera Guide de l'utilisateur Page 61