Intellinet Network IP Camera Guide de l'utilisateur télécharger pdf (Page 42)

NETWORK IP CAMERA User’s Guide

Alarm sensor etc.

② Motion Detection from……

This is to detect motion from camera by S/W data comparison.

When you select “Motion detection”, the Network IP Camera detects a motion triggered by

camera lens. To detect motion the camera compares a previous image from present image.

When the motion is detected, the camera recognizes the data changing through comparing the

previous image data with present one.

③ Periodically…..

The Network IP Camera itself is to be triggered automatically by setting.

You may set the periodical event time for certain hour.

④ Motion detection sensitivity

This is to configure the level of motion detection sensitivity.

The level is composed of 9 levels from 0 to 9.

As the level is higher, the sensitivity is much higher

NOTE

In a dark place without light, it may never detect the motion because its image wouldn’t

changed at all.

NOTE

In case of level 9 for sensitivity, the camera may detect a tiny motion even a light changes,

so the event can be trigger so often. In case of level 1 for sensitivity, the camera may no

detect a tiny motion, though it can be missed some little motion.

It is strongly recommended to configure it as the level of 3 ~6 for sensitivity.

CAUTION

Do not use motion detection function for security purpose because Motion detectio

function is only developed to use for monitoring purpose.

When you want to use it on the purpose of security, you should use certain sensor such as

infrared, motion sensor according to your purpose.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Pas de commentaire

Intellinet Network IP Camera Guide de l'utilisateur Page 42