Intellinet Wireless 150N Manuel d'utilisateur télécharger pdf (Page 60)

2-7-5 802.1x Authentication

You can enable 802.1x user identification (based on the RADIUS

user authentication server) by checking the “Enable 802.1x

Authentication” box when you select “Disable” or “WEP” as the

encryption type. The following message will be displayed:

Here are descriptions of every setup item:

Select SSID

Choose the SSID you wish to configure.

Use internal

MD5/PEAP

RADIUS Server

Uses the built-in RADIUS server (refer to next

section) instead of an external RADIUS server.

If you check this box, the value of the internal

RADIUS server fields will be ignored.

Enable 802.1x

Authentication

Enable or disable the use of 802.1x user

authentication.

RADIUS Server

IP address

Input the IP address of the RADIUS

authentication server here.

RADIUS Server

Port

Input the port number of the RADIUS

authentication server here. Default is 1812.

RADIUS Server

Password

Input the password of the RADIUS

authentication server here.

After you finish with the settings, click “Apply” and the following

message will be displayed:

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 86 87

Pas de commentaire

Intellinet Wireless 150N Manuel d'utilisateur Page 60