Intellinet Wireless 1-Port USB Print Server Manuel d'utilisateur télécharger pdf (Page 116)

108

8.4.2 Wireless

If you want to use the print server through wireless

LAN, please set up the print server through Ethernet first

and make sure your wireless LAN setting is correct. After

setting the wireless LAN, unplug the Ethernet cable and

restart the print server, then you can start to use the print

server through wireless LAN. If the wireless configuration

does not work, please plug the Ethernet cable again, restart

the print server and configure the print server through

Ethernet until the wireless LAN settings are correct.

8.4.2.1 General Setting

You can enable/disable the wireless function and set

parameters that are used for the wireless stations to connect

to this print server from here. The parameters include

“Function”, “Mode”, “ESSID” and “Channel Number”. You

can manually set the parameters of wireless LAN in this

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 142 143

Pas de commentaire

Intellinet Wireless 1-Port USB Print Server Manuel d'utilisateur Page 116