Intellinet 3-Port Print Server Manuel d'utilisateur télécharger pdf (Page 79)

Click the “IP” button to enter the IP setting page. If

you need the print server to automatically get an IP from

DHCP server, select “Auto IP”. You also can select “Static

IP” to manually assign “IP Address”, “Subnet Mask” and

“Gateway” for the print server.

Click the “DHCP Server” button to enter the DHCP

server’s setting page. You can “Enable/Disable” the DHCP

server and assign a range of IP addresses here. The DHCP

server is disabled by default. When “Enable” is selected,

you have to configure “Starting Address”, “Ending

Address”, “Gateway” and “DNS”. The print server will

assign a unique IP for each client.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 152 153

Pas de commentaire

Intellinet 3-Port Print Server Manuel d'utilisateur Page 79