Intellinet Wireless 150N High-Power USB Adapter Manuel d'utilisateur Page 1

WIRELESS 150NHIGH-POWER USB ADAPTER USER MANUAL MODEL 525152 INT-525152-UM-0411-01

Available Networks: This list shows all available wireless networks within the range of the adapter. It also displays network information: SSID,

Status: This eld displays the SSID and MAC ID of the network the adapter is connecting to. Extra Info: This eld displays the link status. Channel

proFile ConFigurationProle Name: Dene easily recognizable prole names to identify the different networks. SSID: The SSID (up to 32 printable ASC

RTS Threshold: This is the minimum packet size required for an RTS (request to send). For packets smaller than this threshold, an RTS is not sen

or pre-shared key (PSK) technology. It provides a high level of assurance to enterprises, small businesses and home users that data will

• WEP: Enables the WEP Data Encryption. When the item is selected, you need to continue setting the WEP Encryption keys. • TKIP: The Temporal

802.1x setting/CertiFiCationEAP Method: The EAP authentication protocols supported by this adapter require that settings be consistent with the wir

the authentication phase. The server presents a certicate to the client and, after validating the server’s certicate, the client presents

which contains the issuer’s public key, into the trusted root certication authority certicate store of the host computer. Intermediate or subo

to this mode. This mode is also the default setting. • 802.11 B only: Though the adapter is compatible with both 802.11g and 802.11b wirele

2 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 150N HIgh-Power USB Adapter, Model 525152.This adapter is a compact high-speed m

Tx Rate: There are several options in the drop-down menu: “Auto” and a range of speeds from “1 Mbps” to “54 Mbps.” When “Auto” is selected, the d

AP can run the radio monitoring through the associated CCX-compliant clients to continuously monitor the WLAN radio environment and discover an

want to direct link to and click “Apply” to add to the DLS Status table (below). - Timeout Value: Specify the timeout value for the direc

pBC (push-Button ConFiguration)1. From the “Cong Mode” drop-down menu, select “Enrollee,” then press the WPS button (or whichever button is used to

24SoftAP4. Should the WPS function fail (as indicated on the following screen, which shows that WPS pairing failed because no WPS-enabled AP was

SoftAP25pin Code1. Enter the 8-digit PIN code of the adapter (highlighted below) in your wireless access point as the WPS PIN code. NOTE: Refer to

26SoftAP This is optional: You can use the default value if you don’t know what will be affected. Auto: When selected, the wireless access point to

SoftAP27 name identied in a wireless LAN. The ID prevents the unintentional merging of two co-located WLANs. The default SSID of the AP is “So

28SoftAPSECURITY SETTINGThis screen — accessed by clicking “Security Setting” on the previous SoftAP Conguration screen — lets you to congure the au

SoftAP29 have the matching password from joining the network, while encrypting the data traveling between authorized devices. • WPA2- PSK: Thi

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct t

30SoftAPACCESS CONTROLThis screen lets you congure the access control policy used within the access point.Access Policy: Select from the drop-down me

SoftAP31MAC TABLEThis screen displays details of the wireless adapters connected to the AP.MAC Address: The addresses of wireless adapters connected t

32SoftAPSTATISTICSThis screen displays the transmit and receive statistical information of the AP. Click “Reset Counters” to clear the data.ABOUTThis

SPECIFICATIONS33SPECIFICATIONSStandards• IEEE 802.11b (11 Mbps Wireless LAN)• IEEE 802.11g (54 Mbps Wireless LAN)• IEEE 802.11n (150 Mbps Wirele

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

eu Countries intended For useThe ETSI version of this device is intended for home/ofce use in Austria, Belgium, Denmark, Finland, France, Germany, G

TABLE OF CONTENTSInstallation ... 6 Conguration ...

INSTALLATION1. Remove the adapter’s protective cap and attach the antenna by securely screwing it onto the antenna connector. 2. With your compu

7. Once the software installation is complete, select “Yes, I want to restart my computer.” Once the reboot is complete, connect the Wireless N US

The conguration utility appears as an icon in the Windows system tray while the adapter is running. You can open it by double-clicking on the icon.I

3. Uncheck “Use Windows to congure my wireless network settings” to enable the utility for the adapter. NOTE: If “Wireless Zero Con