Intellinet Wireless Super G Manuel d'utilisateur

WIRELESS SUPER G OUTDOOR PoE ACCESS POINT AND BRIDGE USERMANUAL MODEL 503679 INT-503679-UM-0808-02

Wireless Mode — The device operates in the frequency of 2.4 GHz for 802.11g. Radio Frequency — Set manually or use SmartSelect for automatic channel

9. From the Basic: Site Survey screen, copy the MAC address (BSSID) of AP1 and add it to the Remote AP MAC Address list on the Operation Mode sc

4. Click “Update” and “Reboot.” The Operation Mode screen should appear as below.5. Repeat Steps 1–4 for the second AP you are bridging to. 6.

MAC address of AP2 (bridge) must be in the Remote MAC Address list of AP1 (bridge). NOTE: Also, the default gateways of AP1 and AP2 should be

Advanced: Security SettingThis screen allows you to congure wireless encryption to prevent unwelcome parties from reading your trafc. Authenticatio

RADIUS Secret — Enter the shared secret only if the 802.1x protocol is used.Key Update Interval — Specify the interval in milliseconds. The default is

Filter IPX Packet — Select to disallow all IPX packets from passing through.Wireless Isolation — Select to disallow wireless clients associated with t

Restore Conguration from Local PC — Allow the restoration of a “Good Cong” from the computer system. Click “Browse” to nd the location of the sav

Status: Association StatusThis screen presents an overview of the MAC address and signal strength (SNR in dBm) of all clients connected to the AP thro

UTILITY INSTALLATION & OPERATIONThe Wireless Super G Outdoor PoE Access Point and Bridge (“Outdoor AP”) utility is easy-to-use software that lets

• After the necessary changes have been made, the administrator can apply the changes to the AP. Check the “Reboot” box and click “Update” to reboo

SPECIFICATIONSStandards• IEEE 802.11b (11 Mbps Wireless LAN)• IEEE 802.11g (54 Mbps Wireless LAN)• IEEE 802.11g+ (108 Mbps Wireless LAN)• IEEE 802

LEDs• Power• WLANCertications• International protection rating: IP 66 (“dust tight” & “powerful water jets”)• Random Vibration (IEC-68-2-64)•

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

INTRODUCTIONThank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless Super G Outdoor PoE Access Point and Bridge, Model 503679.This profess

TABLE OF CONTENTSHARDWARE/CONNECTIONS ...6BASIC IP NETWORKING ...

Regulatory StatementsThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Feder

6HARDWARE/CONNECTIONSModel 503679External AntennaSurge ProtectorHARDWARE/CONNECTIONSThe components, connections and indicators depicted in the image (

BASIC IP NETWORKINGIP (Internet Protocol)IP stands for Internet protocol. In an IP network, every device has a unique IP address (e.g., 192.168.10.35)

Signal Strength — Radio signals drop in power over distance, and even if all the settings are correct, low signal strength makes association impossi

Basic: IP CongurationThis screen allows you to select the IP Mode.Static IP — When you boot up the AP for the rst time, it is in Static mode, and